Craft Project – No Sew Dicky Bow Tie

My younger boys love to dorn a dicky bow tie when they are getting dressed up. The middle boy, who is 9 years old has so many different bow ties in all sorts of designs and colours. He is always wearing one.

They are cheaper enough to buy but I thought I would attempt to make one with some off cut material that I recently bought. In the package was a certain piece of fabric that made me think straight away that it would make a lovely bow tie. As soon as I saw the material I knew what I was going to do with it.

This Dicky Bow is ideal to make if you’re not that comfortable using a needle and thread. It also takes no time at all, so quick to knock up for a last minute outfit choice.

wp-1484581491347.jpg

To make a Dicky Bow Tie You will need:

  • A piece of material
  • A glue gun or fabric glue
  • Scissors
  • Elastic
  • Measuring tape

Instructions:

  • Take a piece of material and depending on who you are making it for roughly judge how big you want the bow tie to be. I cut a piece of material to be 19cm in length and 10cm wide. You will also need a smaller piece of material for the piece that wraps around the middle of the bow tie. This piece 8cm in length and 3cm wide

20170116_145910

  • Make some fold lines to follow. Fold the larger piece in half. Top to bottom and left to right. The material needs to be right side down.
  • Working lengthways. Place some glue along the middle of material to one side of the fold and fold the edge to the middle, pressing down on the glue. Repeat this with the top edge folding it to the middle and securing in place with glue.

wp-1484581491351.jpg

  • Now you need to fold the left and right edges into the middle of the fabric. Secure in place with the glue

wp-1484581491342.jpg

  • Keeping the fabric the wrong side up, fold the length ways in towards the middle again. Only place a little bit of glue in the middle to hold it down

wp-1484581491926.jpg

  • Turn the bow tie over so you have the front of it in front of you. Pinch in the middle and secure with a little glue

wp-1484581491899.jpg

Looking good eh!

  • Measure the neck of the person you are making the bow tie for and cut some elastic of that length. Glue the ends together and then glue on to the back of the bow tie

wp-1484581491377.jpg

  • Take the small piece of material that you cut out and fold the longer edges in to the middle and secure with the glue. Just like you did with the bow tie. Now wrap it around the middle of the bow tie starting at the back where the elastic is.

wp-1484581491362.jpg

Watch your fingers if you are using a glue gun as the glue becomes very hot!

You are now ready to wear your dicky bow

wp-1484581491361.jpg

Doesn’t it look good? I am pretty chuffed with the outcome and I didn’t even have to get out a needle or the sewing machine.

 

 

 

Leave a Reply